Reliable Cold Rolling Mill Manufacturer
1. Its usage
This 6-High Reversing Cold Rolling Mill is customized according to our customer's requirement, it can work with he raw material thickness1.2mm-2.5mm pickled hot rolled steel plate coil SAE1006/1008/1010
EN1011:DD11/DD12/DD13DIN1614:ST22/ST23/ST24 , the final product can be thickness 0.15mm-0.5mm cold rolled steel coil. The working coil width can be from 650mm to1050mm.
Remark: We can customize the cold rolling mills according to your special requirements.
Specifications of Supplied Materials
Material:SAE1006/1008/1010,EN1011:DD11/DD12/DD13DIN1614:ST22/ST23/ST24
Thickness: 1.2mm-2.5mm
Coil Width: 650mm-1050mm
Coil ID: 610mm-760mm
Coil OD: 850mm-2100mm
Max. Coil Weight: 30 tons
Strip Yield strength: <=450Mpa
Strip Tensile strength: <=550Mpa
Finished product specification
Thickness : 0.15mm-0.5mm
coil width: 650mm-1050mm
Coil ID: 610mm
Coil OD: 850mm-2100mm
Max. Coil Weight: 30 tons
Main Technical Parameters of the CRM:
rolling mill specifications: 1150/420/350x1380mm
max. rolling pressure: 12000KN
Max. rolling torque: 73 KN.m
Max. threading speed: 30m/min.
max. uncoilding speed: 300m/min.
max. rolling speed: 1200m/min.
Uncoiling tension: 50~5KN
coiling tension: 140~14KN
Max. coiling speed: 1250m/min.
work roll size: 280~250x1200mm
intermediate roll size: 320~290 x1200mm
support roll size: 950~900 x 1100mm
centering moving range of the uncoiler: +-100 mm
rolling line elevation: +1000mm
CPC centering control accuracy: +-1mm
processing lubrication flow: 8000L/min.
general hydraulic drive presssure: 12 MPa
Unit dreive direction: left side of blooming pass strip heading direction
Max. lifting part weight: about 45 tons
housing weight: about 70 tons
overall dimension of CRM: about 25x31x11m
Characteristics of the 6 High Reversing Cold Rolling Mill
6 High reversing cold rolling mill is the cold rolling production line with designed annual output of 200 thousand tons and adopts UCM-type single-stand mill. It rolls pickled hot rolled coils into cold hard coils. The unit is equipped with hydraulic AGC. The work roll is equipped with positive and negative bending and subsection cooling. The intermediate roll is equipped with the positive bending and moving, and the front and rear frames are equipped with double X-ray thickness gauge, etc. its Characteristics:
1.Uncoiler is equipped with CPC automatic centering function, which adopts EMG products from Germany, and improves the centering response speed and position control accuracy.
2.Rolling line adjustment equipment adopts stepwise wedge combination adjustment, and the input roll diameter can quickly and automatically control the stepwise wedge displacement of the oil cylinder drive to the right position, realizing automatic and quick adjustment of the rolling line;
3.Positive and negative bending of the work roll; the intermediate roll has transverse moving presetting, locking, and positive bending control measure. The bending roll can be controlled from single side; rollers are equipped with subsection cooling and roll shape adjustment. Multiple-plate-shape control measure is able to better control the plate shape of finished strips.
4.Double-station roll changing carriage is adopted, which realizes the swift changing between the work roll and the intermediate roll.
5.Roll system of the rolling mill, the turning roll, and the oil removal roll bearing adopt air-oil lubrication, which can prolong the bearing's life and reduce oil consumption, pollution and maintenance quantity with high lubrication efficiency.
6.X-ray thickness gauge is adopted, improving the thickness precision of finished strips.
7.The whole control system of the Six-High CRM adopts full digital AC driving devices, PLC Unit process control and remote communication network technology. The power supply and distribution, AC and AC motor control, PLC system, remote I / O system, AGC system and human machine interface (HMI) are integrated through two-level network. In the design, the interfaces between each system are designed in a unified way, so as to form the whole automatic control system of modern CRM.
8.The electric system takes safety protection measures of overload protection, strip breakage protection, emergency cut-off, etc.; the unit is equipped with functions of strip tail automatic deceleration, accurate stopping and multi-point stopping; coiler is equipped with functions of cycle memory, strip length calculation, and jaw accurate positioning.
9.AGC automatic system adopts "S7-400+FM458" structure, which makes the utmost use of the controller and matches the quick response of the high-speed rolling mill.
10.In the second-level automation controlled by AGC, rolling schedule is further improved.
11.All key components and parts of hydraulic system adopt import components and parts, which improves system reliability.
12.Hydraulic AGC system is equipped with advanced functions of constant roll gap control, constant roll force
control, constant thickness control, mass flow control, thickness pre-control, tension/speed automatic control, etc.
Equipment Level:
1. The basic automation system of the unit is composed of Siemens S7-400 PLC as the master controller and the corresponding remote I/O(ET-200M), which controls the rolling line and the operation of auxiliary equipment.
2. AGC is a FM458+1.5 level automatic thickness control system with full hydraulic screw-up. It is equipped with control functions of total travel mass flow control, constant roll gap control, constant roll force control, adjustment control, automatic prepressing control, thickness precontrol AGC, thickness monitor AGC, tension/speed AGC, acceleration and deceleration AGC compensation control, roller eccentricity compensation, etc., and it is also equipped with process management functions of rolling process database, data presentation and operating control, product quality tracing, automatic recording of high-speed rolling data, automatic report generation, failure warning, and recording etc.
3.The rolling mill has regulating measures of screw-down off tracking, positive/negative bending of the work roll, the positive bending of the intermediate roll etc.; it has plate shape control measures of intermediate roll transverse presetting, roller subsection cooling etc.
4.Upper and lower work rolls are driven separately
5.Uncoiler is equipped with CPC automatic centering function.
6.Swift roll changing between the work roll and the intermediate roll.
7.The electric system of the rolling mill takes safety protection measures, including overload protection, strip breakage protection, emergency cut-off, etc.; the unit is equipped with functions of strip tail automatic deceleration, accurate stopping, and multi-point stopping; coiler is equipped with functions of cycle memory, strip length calculation, jaw accurate positioning, and work roll spindle accurate positioning.
8. The unit is preset with the process parameter, and detection, presentation, alarming and stored recording for process parameters and equipment key parameters.
9.The master operational console is equipped with human-computer interface, image display of finishing rolling mill state (main parameters like uncoiling, coiling tension value, current value, speed value etc.), manual regulation, rolling process parameter setting, failure warning and report printing.
10.The rolling line elevation adopts stepwise wedge quick regulation.
11.Roll system adopts air-oil lubrication.
12.Strip surface is degreased by the combination of air purge and roller drying and degreasing.
13.X-ray thickness gauge is adopted.
14.Gears adopt five-level precision alloy steel carburizing, quenching gears, and oil injection circulating lubrication
15.Key parts like the principal axis of the coil mandrel, the fanlike segment and the hollow shaft adopt alloy forged steel.
16.Components of low-pressure hydraulic system adopt renowned products using imported technologies; key components like the high-pressure AGC system, the bending roll and the CPC system also adopt imported products.
The Range of Our Main Cold Rolling Mill, Cold Rolling Production Line
Note: we can customize the machine according to your requirements.
|
Specification of Cold Rolling Mill |
|
roller Type |
4-roller , 6-roller, 8-roller, 12-roller, 20-roller cold rolling mill. |
|
Stand Type |
single-stand reversible cold rolling mill; tandem cold rolling mill( from 3 stands to 6 stands) |
|
Size of finished products |
Width: from 350-1750mm; Thickness: from 0.1mm to 3.0mm |
|
Application |
our range of products covers all areas of the cold rolling industry, suitable for the production and upstream & downstream sectors of cold-rolled products such as plain carbon steel, stainless steel, alloy steel coil and plate. |
Why Choose Us?
1. Professional Turnkey Solutions to the steel makers including factory design, machine design, manufacturing, installation & commissioning with mechanical, electrical and hydraulic integrated services
2.Customized machine based on the customer's requirements
3. upgrading and revamping service to the used CRM if needed
4. Timely and convenient after-sale service in the spare parts supply and technical support!
Audited Supplier 
){kind=link}
){kind=link}