This product is no longer promoted on Made-in-China.com. If you find any infringement or
sensitive information of it, please contact
us for
handling. Thank you.
Wide-Band Steel Electroplated Tin Coils, Packaging
Thickness of Finished Products
0.15~0.55mm
Max Width
1050mm
Width
From 750mm to 1250mm
Line Speed
150m/Min
Production Line Capacity
80000 Tons Per Year
Plating
Double-Sided Tin Plating
Max Coil Weight
25 Tons
Transport Package
Plywood Box or Films or as Required
Specification
can customized as you required
Trademark
Moran
Origin
China
HS Code
8543300090
Production Capacity
10 Sets
Product Description
General Information of cost effective used 1250 tin plating line /equipment/machine for sale
1.1Production line of cost effective used 1250 tin plating line /equipment/machine for sale The electroplating tin production line can produce wide-band steel electroplated tin coils. The finished product has excellent corrosion resistance, firmness, beautifulness, light weight and good formability, and is widely used in the packaging industry. Production line process: The electroplated tin plate production adopts the Ferrostan process, using sacrificial anode and auxiliary insoluble anode technology.
1.2 Main technical parameters of the production line
Production line flow direction: The production line is from right to left from the operation surface (the right hand unwinds the left hand to rewind)
Maximum strip width: 1050mm
Strip thickness: 0.15~0.55mm
Main line production speed: 150m/min
Production line capacity: 80,000 tons / year
(0.25*760*140*60*7.85*6600=82687t/year) 2. Technical data
Line parameter
Production line maximum speed 150m/min
Operating mode continuous plating PlatingDouble-sided tin plating
2.2Strip parameters
Raw materials: low-carbon cold-rolled steel coils that have been subjected to primary and secondary cold rolling, annealing, leveling and trimming.
Substrate tempering degree: T2, T2.5; T3; T4; T5; T6 and DR, DI Width Maximum1050mm
Minimum 700mm
Thickness Maximum0.55mm
Minimum 0.15mm
2.3Steel coil parameters
Outer diameter --- raw material coil Maximum: 1800mm
---Finished product Maximum: 1800mm
Minimum: 800mm Inner diameter 508mm
Weight --- Raw material coil Maximum: 25t Minimum: 4t
---Finished product Maximum: 25t Minimum: 3t
2.4Segment speed
Inlet section 30-190m/min Process section 30-150m/min Outlet section 30-190m/min
Wear belt 15m/min
2.5 Process method Electrolytic Tin Ferrostan
2.6 Coating thickness
Tin plating #10(1.1/1.1 g/m2) 25#(2.8/2.8g/m2) #50(5.6/5.6g/m2) #75(8.4/8.4g/m2) #100(11.2/11.2g/m2) It is possible to achieve a poor thickness tin plating at 1:4.
Product quality standards According to GB/T2520-2000, it can meet the production of food-grade liquid two-piece and three-pack filling products. The premise is that your company must provide substrates that meet the production of food grades, and provide food grade electroplated anode tin plating (purity of 99.95% tin).
2.7 Public facilities
Power supply380+10%V, 3-phase 5-wire system, 50+3% HZ 220V, single phase, 50HZ Complete line installed power: about 5118kw (4100KVA transformer is recommended) Of which: Rectifier power supply: 1932KW Soft solution: 1500KW Complete line drive and process equipment and others: 1686KW
Water supply ---Deionized water 0.15---0.40Mpa, conductivity ≤10us Deionized water volume: 8M3/h ---Cooling and softening water Inlet pressure: 0.15---0.40Mpa Return pressure: 0.0 Mpa; Inlet temperature ≤ 35 ° C pH = 6-8; Hardness ≤8.36dH pH about 7.2 Circulating cooling water volume: 200M3/h Softened water volume: 20M3/h
Compressed air 0.7Mpa, 10M3/min, without oil Total gas supply: 10M3/h
Surroundings --- Temperature the highest 45 ° C, the lowest 0 ° C ---Relative humidity Average (≤) 92%, no condensation
Our advantage: 1) Customized Production 2) High cost-effective product 3). All-around pre-sales & after-sales services
4) Independent intellectual property rights
For More information of this cost effective used 1250 tin plating line /equipment/machine for sale , Please feel free to contact us, we can also offer after sale service from disassemble to commissioning.