1. Equipment advantage:
This method can be used for processing all kinds of steel, pickling, blasting, painting can replace the traditional process
Compared with the acid pickling process, this process is a pure physical process, does not produce harmful waste, after the processing of stainless steel rust free and free of chemical residues, no harmful emissions.
After new antirust device processes the sheet layer is the essence of grit, so on the degree of the metal loss than to much smaller and future is not easy to rust.
After treatment of steel that require no lubrication, in the late stage of the process compared with the surface content of steel cutting, welding more efficiency, more accurate; Not due to high temperature and by-product of oil mist in the operation affect health.
The board does not need to buy the machine, the configuration of the manual, save more additional costs.
The area can be reduced by 50%; The working cost (the raw material, equipment depreciation, etc. ) is reduced by 30%, the purchasing cost of the production line is reduced by 20%, and the production line assembly cost is reduced by 50%.
The new technology into the surface treatment of steel plate, hot rolled plate can make better quality, lower cost, higher capacity, complete environmental protection.
2. Technical requirements
Design basis:
Product specification: Unit (mm)
Specifications: 1550mm
Cleaning speed: 30-40m/min
Surface cleanliness: SA3 grade
Peening coverage: 99%, to meet the requirements of cold rolled galvanized
3. High pressure pump configuration parameters:
High pressure pump rated working pressure: 55MPa, frequency conversion control.
High pressure pump total power: 1600Kw
Abrasive: Ordinary steel
Abrasive specification range: 0.1-0.4mm
In addition to scale speed: 30-40m/min
Strip feeding way: Linear horizontal transmission, upper and lower two sides simultaneous cleaning.
Environmental indicators: Water and abrasive recycling, no waste water, waste gas, waste residue discharge.
Total power: 2000Kw
| No. |
Incoming thickness(mm) |
Output
Thickness(mm) |
Incoming width (mm) |
Coil weight (t) |
Annual output |
Ratio
(%) |
| 1 |
2 |
0.2 |
1100 |
20 |
5000 |
2 |
| 2 |
2.3 |
0.25 |
1100 |
20 |
7500 |
3 |
| 3 |
2.75 |
0.35 |
1200 |
20 |
50000 |
20 |
| 4 |
3.0 |
0.45 |
1200 |
22 |
75000 |
30 |
| 5 |
3.0 |
0.5 |
1200 |
22 |
87500 |
35 |
| 6 |
3.5 |
0.7 |
1300 |
25 |
12500 |
5 |
| 7 |
3.5 |
1.0 |
1300 |
25 |
7000 |
3 |
| 8 |
4.0 |
1.5 |
1300 |
25 |
5000 |
2 |
| Total |
|
|
|
|
200000 |
100 |
Audited Supplier 
){kind=link}
){kind=link}