1450mm Double Bending and Double Straightener Unit Production Line

• Customization: Available
• Type: Balance Roller Straightening Machine
• Usage: Sheet
• Model NO.: 1450mm double bending and double straightener unit
• Voltage: 220V
• Automatic Grade: Automatic
• Principle: Large Deformation
• Certification: SGS
• Warranty: 12 Months
• Customized: Customized
• Condition: New
• Highest Speed: 300m/Min
• Maximum Drawing Tension: 15 Tons
• Width: 650-1450mm
• Application: Plain Carbon Steel, Stainless Steel
• Diameter of Its S Roll: No Less Than 800mm
• Transport Package: Plastic Film, Plywood Box or as Required
• Specification: it depends on the specification
• Trademark: Moran or customized
• Origin: China
• HS Code: 8462211000
• Production Capacity: 5 Sets

Product Description

 General Introduction of 1450mm double bending and double straightener unit Production Line 
Its Technical parameters 
    Machine model: use 4 roll temper mill + double bending and double straightener

1. Product specification: 0.3~1.2mm X 500~750mm;
2. Unit speed: 300 m/min(Max)
3. Temper extension: 80KN;
4. incoming coil inner diameter: Φ508mm;
5. Coil outer diameter: Φ1800mm;
6. Maximum coil weight:12 ton/coil
7. Maximum temper strength:400T.

General Introduction of Tension Levelers
 

No	Parameter & function
1	Function	It is used for straightening metal strip through plastic elongation under the joint effect of continuous drawing and deformation so as to eliminate the defect of sheet metal.
2	Highest speed	300m/min
3	Maximum drawing tension	15 tons
4	Diameter of its S roll	No less than 800mm
5	Configuration	CPC system is used for decoiling; EPC system is used for coiling;
6	Optional	Seam welder, electrostatic strip-oiling apparatus
7	Electric drive system	Siemens S7-400 PLC as main controller
8	Hydraulic and Key elements are from famous Chinese manufacturers

The Range of Our Customized Tension Leveler

Specification of Cold Rolling Mill
Width	650-1450mm
Application	plain carbon steel, stainless steel

Hebei Moran provides the customers with all-around, high value-added pre- sales & after-sales services. Factory design, selection of utility & auxiliary facilities, unit process layout, civil foundation design reference, as well as the well-rounded training combined with theory and hands-on exercises for line operators and maintainers, all are freely available.
Our advantage:
1) Customized Production 
2) High cost-effective product
3). All-around pre-sales & after-sales services
4) Independent intellectual property rights



For More information, Please feel free to contact us!

Cindy Liu
Website: moranchina.en.made-in-china.com
 
 
Phone: [phone]
 
 
Webchat: 13315612867