| Customization: | Available |
|---|---|
| After-sales Service: | Life Long After Sales |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Raw material: | cold rolled carbon steel, high quality carbon structural steel and low alloy steel |
| Representative: | Q195, Q235, ST12 steel, ST13, SPCC, SPCD and 20# |
| Yield strength: | less than 360N/mm2 |
| Tensile strength: | less than 700N/mm2 |
| Strip thickness: | 1.5 ~ 6 mm |
| Strip width: | 800 ~ 1300 mm |
| Coil diameter: | 610 mm diameter |
| Steel coil diameter: | 2100 mm diameter Max / Min with 1100 mm |
| Max roll weight: | Max 25 t |
| Annual operating time: | 300 days *24 hours |
| Main energy medium: | cooling water, electricity, steam |
| Production form: | volume to roll |
| Annual production capacity: | 300000 tons / year |
| The maximum production speed units: | less than 35m/min |
| Process method: | push pull type shallow groove turbulence hydrochloric acid pickling |
| Production line layout: | from the operating side to see from left to right (according to customer requirements can be adjusted) |
| Max processing speed of production line: | 35 m/min |
| Wear speed: | 0-15m/min |
| Point moving speed: | m/min 0-10 |
| Acid concentration: | g/L 200 HCl 125g/L, Fe2+ g/L, 5 Fe3+ Max |
| Min pickling time: | 26S |
| The total length of the acid tank | about 32 m |
| Total length of the line: | about 100 m |
| Max uncoilng tension: | 50 kN |
| Max coiling tension: | 120 kN |
Pickling unit: 1# saddle -- 1# feeding trolley -- 1# Un-Coiler (with press roll) -- 1# reverse bending roller -- 1# uncoiling scraper -- 7-roll clip-feeding straightener -- cutting head scissor -- cutting Angle scissor -- welding platform (reserved position, About 1.5 m long), 1 # vertical guide roller - 1 # pinch machine - pickling tank (including the backwash) 1 ~ 3, preflush, flush the tank (5) - hot air drying machine (with blowing side) - 2 # vertical guide roller - 1 # pinch roll, looper, 3 # vertical guide roller, pinch & centering machine, cutting edge trimming disc, trimmings coiling machine, three roller tensioning machine - cut tail cutter (with pinch) - oiled machine (placeholder) - 4# vertical guide roller -- EPC floating device -- Outlet steering roller -- guide table -- winder (with press roller) -- tail press roller -- unwinding trolley -- saddle.
Thanks and you are warmly welcomed to come to China to see our running lines.
){kind=link}