Continuous Pickling Line for Steel Coil

• Production Scope: Product Line
• Automation: Automation
• Process Method: Push-Pull Shallow Trough Turbulence Hydrochloric a
• Apu Layout Direction: Left to Right When Seating at Operation out Board
• Max. Process Speed: 70-150m/Min
• Process Speed in Changing Coil: 50-60m/Min
• Model NO.: continuous pickling line
• Point Move Speed: 10-30m/Min
• Transmission Way: AC Driving System, Speed Regulated by Variation
• Acid Concentration Max: 200g/L HCl, 125g/L Fe2+, 5 G/L Fe3+
• Fluorine Content in Acid: Less Than 4ppm
• Minimum Pickling Time: 26s
• Acid Trough Length in Total: About: 50m
• Transmission Type: Flexible
• Automatic Production Line: Comprehensive
• Certification: SGS
• Rhythm: Flow Production Line
• Transport Package: Plastic Film/Plywood Box / as Clients′ Required
• Specification: it depends on the specification
• Trademark: Moran or customized
• Origin: Hebei, China
• HS Code: 722100000
• Production Capacity: 5-10 Sets

Product Description

General introduction of continuous  pickling line for steel coil 


This production line is push-pull Acid Pickling Unit, which adopts the most advanced Shallow Trough Turbulence Acid Pickling technology. The equipment and technology provided are reliable advanced mature whole set equipments and technology that could fulfill the buyer's need of steady production and long-term running which are proved by actual production. This technology is featured by reasonable structure, high efficiency, low consumption, convenient operation, fewer malfunctions.

Design basis
Raw Material

Cold rolled carbon structural steel, high quality carbon structural steel and low alloy steel coil
type of steel: Q195, Q235 ,ST12 ,ST13, SPCC ,SPCD20#.
Hot belt temperature≤55 Degree  Centigrade  
Yield strength: 210~360N/mm2
Tensile strength: 270~610N/mm 2



Specification:    
the thickness of steel: 2.0~~3.5mm
the width of the steel: 650~750mm
Inner diameter of coils to be pickled: Φ610mm/Φ760mm
Inner diameter of coils after being pickled: ф508mm
                       min Φ900mm
coil inner diameter:      max Φ1800mm
                          min Φ900mm
coil unit weight          max  13t
annual work plan:        300 days*24 hours
Energy: water, electricity and vapor
Product form: coils one after another
Production capacity:             200000tons/ Year 
Specification:    
the thickness of steel: 2.0~~3.5mm
the width of the steel: 650~750mm
Inner diameter of coils to be pickled: Φ610mm/Φ760mm
Inner diameter of coils after being pickled: ф508mm
                       min Φ900mm
coil inner diameter:      max Φ1800mm
                          min Φ900mm
coil unit weight          max  13t
annual work plan:        300 days*24 hours
Energy: water, electricity and vapor
Product form: coils one after another
Production capacity:             200000tons/ Year



Process and equipments


coil loading car(1,2)  decoiler units(1,2)  decoiling scraper(1,2)  Five roll leveler(1,2) crop shear1# tensioner 1#Vertical guide roller pickling1 pickling 2 pickling 3pickling 4washing 1washing 2washing 3washing 42# vertical guide roller blowing machine  Hot air dryer automatic CPC2# Tensioning machine shearing machine steeringpinch roller Coiler unit (EPC)   outlet coil unloading trolley

Our advantage:
1) Customized Production 
2) High cost-effective product
3). All-around pre-sales & after-sales services
4) Independent intellectual property rights
Our advantage:
1) Customized Production 
2) High cost-effective product
3). All-around pre-sales & after-sales services
4) Independent intellectual property rights




Hebei Moran provides the customers with all-around, high value-added pre- sales & after-sales services. Factory design, selection of utility & auxiliary facilities, unit process layout, civil foundation design reference, as well as the well-rounded training combined with theory and hands-on exercises for line operators and maintainers, all are freely available.
For More information, Please feel free to contact us!