Hebei Moran Environmental Protection Technology.,Ltd is one of main metallurgical equipment factory in China. our products include new and used steel and aluminum rolling mill,2hi 4hi 6hi 8hi to 20 hi rolling mill machine, skin pass mil, tension leverler, tension leverler and skin pass mix mill, caster, steel coating line, pickling line ,annealing furnance,grinder, and other related equipment and its parts.our machine has been exported to many country and enjoy a very good reputation among our users.
1450mm Temper Mill /Skin Pass Mill for Steel Strps and Sheet
It is designed by our company has been successfully tested, and the leveling effect of the unit is very good, which improves the plate shape and surface quality of the product, as well as the mechanical properties of the product.
1. The speed of the unit is fast. The exit speed of the leveling unit of our company has reached 700m / min, which has realized the speed of 600m / min in normal production. It has greatly increased the output and reduced the cost.
2. The leveling range of the unit is wide. The products with thin specification of 0.15 * 1200mm and thick specification of 1.8 * 1250mm can be produced in batch.
3. Large tension leveling, the front tension of the unit can reach 18 tons, and the rear tension can reach 16 tons. Good board shape, fully meet customer requirements.
4. The control function of the screwdown system is complete, which not only uses the AFC, APC and other conventional settings, but also adds the AEC, AGC and other means. The functions of constant elongation, constant pressure, constant position and thickness automatic control are realized.
5. The front and rear "s" rollers are vertically configured, which not only has high tension but also realizes automatic belt passing, avoids the inconvenience of manual belt threading, and improves the efficiency and safety of the unit.
6. Anti wrinkle roll is equipped at the front and back to eliminate the shape defects of ultra-thin flat plate. In addition to the above leveling function, the unit also has rolling function. The unit adopts large rolling force and rolling torque, with rolling force of 1000 tons and torque of 4.36 tons · M. this configuration can fully meet the requirements of 40 passes reduction of soft material (0.4mm, equivalent to 4 times of the general leveling machine), and can realize rolling function. At present, reversible rolling reaches 0.15mm The width is from 850mm to 1270mm, and the rolling effect is ideal.
Unit parameters:
Raw material parameters:
1.1 Thickness: 0.3~5.0mm
1.2 Width: 500~1500mm
1.3 coil diameter: Φ508mm
1.4 coil outer diameter: maxΦ2000mm
1.5 Maximum coil Weight: 27ton
1.6 Finished product specifications:
1.7 Thickness: 0.2~4.5mm
1.8 Width: 500~1500mm
1.9 inner diameter of the coil: Φ508mm
2.0 outer diameter of the coil: maxΦ2000mm
2.1 Maximum coil Weight: 27ton
2. The main technical parameters of the unit:
2.1 maximum rolling pressure: 9000kN
2.2 maximum rolling speed: 1200m/min
2.3 maximum take-up speed: 660m/min
2.4 coiling tension: 60-8 kN
2.5 Work Roller Size: Φ350~Φ320×1500 mm
2.6 Support Roller Size: Φ750~Φ700×1450mm
2.7 Coil reel diameter: Φ508~Φ610mm
2.8 Maximum opening degree of work roll (new roll): 30mm
2.9 Hydraulic Transmission System Pressure: 10 Mpa
2.10 flat bending system pressure: 12 MPa
Note: We can also customize the machine based on our customers' requirements!
Audited Supplier 
){kind=link}
){kind=link}