After-sales Service: | Life Long Repairing Service |
---|---|
Warranty: | 1 Year |
Customized: | Customized |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Incoming Material | Finished Products | ||
Raw Material: stainless steel (200 series, 300 series) |
Mechanical property: σs≤650 N/mm2 |
Thickness: 0.6-3.0mm | Width: 450-600mm |
Thickness: 5.0-6.0mm | Width: 450-600mm | Coil Diameter( ID/OD): Φ508/Φ1800 mm |
Max Coil Weight: 12 MT |
Coil diameter (ID/OD): Φ508/Φ1800mm |
Max Coil Weight: 12MT | Longitudinal thickness tolerance (when rolling at steady speed): <±0.005mm(d≤0.5mm) <±1.0%d (d>0.5mm) |
Longitudinal thickness difference (when acceleration and deceleration): <±0.01mm(d≤0.5mm) <±2.0%d (d>0.5mm) |
Requirements: 1) Strip camber: ≤5mm/10m; tower: ≤5mm 2) Strip tolerance: ≤±0.15mm; Lateral difference: ≤0.20mm 3) Hardness uniform, there is no inclusion, shrinkage hole, crack edge and other obvious defects on strip surface. |
Transverse thickness difference (when rolling at steady speed): <±1.5%d |
Tolerance of plate cut: ≤40I |
Parameters of cold rolling mill | |
|
2) Drive Mode: back-up roll drive |
3) Max rolling pressure: 6000 KN | 4) Max rolling speed: 360 m/min |
5) Coiling tension: 0~150~200KN Coiling Speed: 0~200~360 m/min |
6) Size of work roll: 105×750mm |
7) Size of intermediate roll: 85×700 mm | 8) Size of back-up roll: 650×600 mm |
9) Backing bearing: 125 mm | 10) Diameter of Reel: 508 mm |
11) Rolling line elevation: +1000 mm | 12) Cross section of mill housing: 35cm×45cm=1575 cm2 |
13) Diameter of turning roller: 300 mm | 14) Diameter of AGC cylinder piston:420 mm |
15) AGC cylinder stroke: about 100mm | 16) Left and right coiling motor: Z560-4B 800kw 400~1200r/min 440v one set |
17) Main motor: Z560-5B 800kw 400~1200r/min 440v two set | 18) working pressure of hydraulic system: General hydraulic transmission: 10 Mpa Pressure of press-down system: 25 Mpa |
19) Installed Capacity of mechanical equipment and electrical apparatus DC: 800KW*4 =3200KW AC: ≈200 KW |
20) Lubrication mode of reducer: Dilute oil cycle |
21) Cooling station of process lubrication: Pure oil rolling (prepared by user) | 22) Max lifting weight: ≈10mt(back-up roll device) |
23) Maximum weight of installed parts ≈15mt (Mill Housing) | 24) Dimensions of equipment unit ( Length*Width*Height): ≈12x15x6 m |
Suppliers with verified business licenses