750mm 4 High temper mill
Note: We can customize the machine according to your requirements!
750mm 4HighTemper Mill
1. Technical parameters of the unit
1) Machine model: 4 Hi temper mill
2) Product specification: 0.8~4.0mm X 150~750mm;
3) Unit speed: 150 m/min(Max)
4) Temper extension: 80KN;
5) incoming coil inner diameter: Φ508mm;
6)Coil outer diameter: Φ2000mm;
7) Maximum coil weight:15 ton
8) Maximum temper tension:200T.
2.Main Technical Parameters
1) Mill specification: Φ350X850mm/Φ650X800mm
2) Maximum temper tension:200T;
3) Maximum temper speed: 150m/min;
4) Dimension of work mill: Φ350X850mm,
5) Dimension of support roll: Φ650X800mm,
6) Dimension of back-up roll: Φ800X850mm, Polyurethane coating.
7) Maximum roll series opening: 30mm;
8) Uncoiler reel diameter: Φ470mm~Φ508mm;
9) Reel diameter: Φ485mm~Φ508mm;
10) Drive type: be driven by the upper and lower work roll
11) Work pressure of general hydraulic system:10Mpa;
12) Work pressure of bending system:15Mpa;
13) Work pressure of high pressure system:21Mpa;
14) Power of the main motor of the unit:
Uncoiler:90kw 1set
1#S roll motor:45kw 1 set
2#S roll motor:55kw 1set
Main motor:160kw 1set
3#S roll motor:55kw 1 set
4#S roll motor:45kw 1set
Reel motor: 120kw 1set
15)Roll change setting: the lift roll change car may either change the support roll or the work roll;
16) The mill automation system configuration:
industrial computer automatic control, Siemens S7-400 automation drive control system, hydraulic pressure AEC.
Thomas Qian
Website: moranchina.en.made-in-china.com
Audited Supplier 
){kind=link}
){kind=link}